政策解讀
快速擇校
2012年MBA聯考英語文章精編閱讀(6)
UNIT 6
TEXT
San set out to improve efficiency at the shirt factory but, as we find out later in this unit, his plans turned out not quite as he had expected.
Sam Adams, Industrial Engineer
If you ask my mother how I happened to become an industrial engineer, she'll tell you that I have always been one.
She means that I have always wanted everything to be well organized and neat. When I was still in elementary school, I liked to keep my socks in the upper left-hand drawer of my bureau, my underwear in the upper right drawer, shirts in the middle drawer, and pants, neatly folded, in the bottom drawer.
In fact, I was the efficiency expert for the whole family. I used to organize my father's tools, my mother's kitchen utensils, my sister's boyfriends.
I needed to be efficient. I wanted to be well organized. For me, there was a place for everything and everything was always in its place. These qualities gave me a good foundation for a career in industrial engineering.
Unfortunately, I was also a bit bossy and I wasn't a very good listener. You'll see what I mean when I tell you about the first project I ever did after I finished my bachelor's degree at the university.
After graduation I returned home to my small town in Indiana. I didn't have a job yet. Mr. Hobbs, a friend of my father's, owned a small shirt factory in town. Within the past five years it had grown from twenty to eighty workers. Mr. Hobbs was worried that his plant was getting too big and inefficient, so he asked me to come in on a short-term basis as a consultant.
I went to the plant and spent about a week looking around and making notes. I was really amazed at what I saw.
Most curious of all, there was no quality control whatsoever. No one inspected the final product of the factory. As a result some of the shirts that were put in boxes for shipment were missing one or two buttons, the collar, even a sleeve sometimes!
The working conditions were poor. The tables where the workers sat were very high and uncomfortable. Except for a half hour at lunchtime, there were no breaks in the day to relieve the boring work. There was no music. The walls of the workrooms were a dull gray color. I was amazed that the workers hadn't gone on strike.
Furthermore, the work flow was irregular. There was one especially absent-minded young man in the assembly line who sewed on buttons. After a while I recognized him as "Big Jim," who used to sit behind me in math class in high school. He was very slow and all the shifts were held up at his position. Workers beyond him in line on his shift had to wait with nothing to do; therefore, a great deal of time and efficiency were lost as Big Jim daydreamed while he worked. All week I wondered why he wasn't fired.
After I made observations for a week, Mr. Hobbs asked me for an oral report of my findings. I covered my major points by telling him the following:
"If you have a quality control inspection, you will greatly improve your finished product."
"If the assembly line is redesigned, a smooth work flow can be achieved and time and energy can be saved."
"If you decrease the height of the worktables, the machine operators will work more comfortably."
"If the management provides pleasant background music and beautifies the dull setting, the factory will be much more productive."
"If the workers have a fifteen-minute coffee break in the morning and afternoon, they will be more efficient."
"If excellent work results in frequent pay increases or promotions, the workers will have greater incentive to produce."
Mr. Hobbs thanked me for this report and told me he would talk over my suggestions with his brother, the co-owner and manager of the factory. "We're interested in progress here," he said. "We want to keep up with the times."
He also gave me a check for $ 100 and a box of shirts with his compliments.
NEW WORDS
efficiency
n. the state or quality of being efficient 效率
industrial
a. of industry 工業的
neat
a. orderly and clean 整潔的
elementary
a. of or for beginners 初等的,初級的
sock
n. 短襪
drawer
n. 抽屜
bureau
n. a chest of drawers for bedroom use 衣柜
underwear
n. 內衣
pants
n. trousers
expert
n. a person with special knowledge or skill 專家,能手
kitchen
n. room used for cooking 廚房
utensil
n. any tool or container used in the house, esp. for cooking 用具,器皿
quality
n. the degree of goodness which a thing or a person possesses 質量;品質
foundation
n. 基礎
career
n. profession; way of making a living 職業;生涯
engineering
n. 工程學;管理
unfortunately
ad. 不幸的是;遺憾的是
bossy
a. always telling other people what to do and how to do it, like a boss 愛指揮人的;專橫的
project
n. a piece of work; a big plan 項目;方案
bachelor
n. a person who had the first university degree 學士
graduation
n. completion of an educational course 畢業
graduate
vi.
short-term
a. involving or lasting a short period of time 短期的
basis
n. 基礎;根據
consultant
n. a person who gives professional or technical advice 顧問
consult
v.
amaze
vt. fill with great surprise or wonder 使大為驚訝,使驚愕
curious
a. strange 奇怪的
whatsoever
a. of any kind, at all 任何的,絲毫的
inspect
vt. examine 檢查
特別聲明:①凡本網注明稿件來源為"原創"的,轉載必須注明"稿件來源:育路網",違者將依法追究責任;
②部分稿件來源于網絡,如有侵權,請聯系我們溝通解決。
西藏在職研究生報考條件與要求大專及以上學歷可報。非管理類專業,應屆本科、本科畢業、本科畢業同等學力(專科畢業滿2年或本科結業)、已獲碩士或博士學位者可報考;管理...
上海在職研究生有哪些學校?上海財經大學、上海對外經貿大學通過同等學力申碩方式招生,學費分別為3.8-4.98萬元、3.5萬元。華東政法大學、上海師范大學等則以非...
法學在職研究生有哪些具體研究生方向?政治學聚焦政治現象,可從事公務員、國際組織等工作;社會學研究社會結構,適用于市場調研等領域;馬克思主義理論強調理論聯系實際,...
環境與資源保護法學在職研究生主要通過同等學力申碩和非全日制研究生招生,同等學力申碩可以免試入學,非全研究生則需要參加考研
國際法學在職研究生教育為法律從業者提供了提升學歷與專業能力的機會,其中同等學力申碩和非全日制研究生是兩大主流招生方式。本
北京藝術類在職研究生學校有中國人民大學、中國社會科學院等,不同的學校,招生的藝術類在職研究生方向也是不同的。像中國人民大學藝術類專業方向有音樂學、美術學等。
評論0
“無需登錄,可直接評論...”